How to Remove a Broken Key from a Lock: 11 Snapped Key Hacks (2024)

Co-authored byShawn fa*goand Cheyenne Main

Last Updated: May 23, 2024Fact Checked

Getting a Broken Key Out of a Lock

Tweezers

Download Article

1. Grab and pull the key out with a pair of tweezers. Spray graphite powder or a lubricant like WD-40 into the keyhole to make it easier to pull the key out. Grab the broken end of the key with the tweezers and pull it straight out.^[1]

   • Alternatively, try the same method with a pair of scissors.

Advertisem*nt

Pin

Download Article

1. Use a sewing, safety, or bobby pin to pry the key out. Spray the keyhole with lubricant. Insert a pin into a space between the key and the keyhole. Try to get the tip of the pin into a groove or notch in the key and pry the key out of the hole.^[2]

   • If you can’t get enough leverage, use a pair of pliers to bend the tip of your pin and use the tip to grab the side of the key.^[3]
   • Once the key is partially out of the lock, use a pair of tweezers or pliers to grab the end and pull it all the way out.
   • Alternatively, use a paper clip or a sewing needle. You can also a fish hook.^[4]

Screw

Download Article

1. Insert a screw in the keyhole, turn it slightly, then pull the key out. Apply a lubricant or graphite powder to the inside of the keyhole. Grab a thin screw and place the pointed end in a space between the key and the edge of the keyhole. Screw it in a little bit until the threads catch on the key, then pull the key out.^[5]

   • If the broken end is sticking out, use the tip of the screw to pry the key out of the hole.

Advertisem*nt

Knife

Download Article

1. Use 2 kitchen or utility knifes to pry the key out of the hole. Spray the keyhole with a lubricant or graphite powder. Slot a kitchen or utility knife between the key and the edge of the keyhole. Slot the other knife in the space on the other side of the key. Gently rotate both knives to pull the broken key out of the keyhole.^[6]

   • Make sure to wear work gloves and work slowly so the knives don’t slip.
   • Once the key is poking out of the lock, use a pair of tweezers or pliers to pull it all the way out.

Hot Glue Stick

Download Article

1. Push a melted hot glue stick against the key and pull it out. Use a lighter to melt the end of the hot glue stick. Once the tip is melted, press it gently onto the end of the broken key. Wait for 1 to 2 minutes so the glue dries, then slowly pull the stick straight back. The key should come out with it.^[7]

   • Alternatively, apply super glue to the end of the key head, clean the edges with a paper towel, then hold the key back together. Let it dry completely, then pull the key out.^[8]
   • Try to avoid getting glue inside the lock mechanism. If you do get glue inside, you may need to call a locksmith.

Advertisem*nt

Needle Nose Pliers

Download Article

1. Pull out the end of the key with thin needle nose pliers. Spray the keyhole with a lubricant like graphite powder or WD-40. Use needle nose pliers to grab the broken end of the key that’s sticking out. Pull the key straight out.^[9]

   • If the key is really far into the lock, Master locksmith Shawn fa*go says to use “really thin needle nose pliers, almost like scissors or surgical tools, to grab onto the key and pull it out.”

Saw Blade

Download Article

1. Break off the end of a jigsaw blade and use it to pry out the key. Spray the keyhole with a lubricant. Use a pair of pliers to break off one end of the jigsaw blade. Slide the broken side of the blade into the space between the lock and the key, twist it slightly, and pull the key and the blade out.^[10]

   • Jigsaw blades are made of a brittle metal, which makes them easy to break with a pair of pliers.
   • Cover one end of the blade with duct tape so you have a safe handle to grab onto.
   • Alternatively, try using a barbeque skewer or a bicycle spoke.
   • If the key comes partially out, just grip the end with needle-nose pliers and finish removing the key the rest of the way.

Advertisem*nt

Drill

Download Article

1. Drill into the side of the key and pry it out of the lock. This method works best if the key is visible. Insert a drill with bit that’s about the width of the key in the exposed side of the key. Drill a small hole into the key. Insert the bit, a paperclip, or another small long object into the hole and pry the key out.^[11]

   • Make sure not to drill into the lock.

Magnet

Download Article

1. Use a strong magnet to grab onto the end of the broken key. Most modern keys are made of brass, aluminum, or nickel silver.^[12] If your key is made of aluminum, you can use a very strong magnet to pull it out. Just spray the keyhole with a lubricant like WD-40, place the magnet onto the end of the broken key, and pull it straight out.

   • Brass isn’t magnetic.^[13] Nickel is magnetic, but silver isn’t.^[14] Depending on the composition of your key, a magnet might not attract to it.
   • If your key doesn’t pull out with a magnet, try a different method to remove it.

Advertisem*nt

Extractor Tool

Download Article

1. Slide a key extractor tool into the lock, turn it, and pull the key out. Spray a silicone lubricant or graphite powder into the keyhole. Master locksmith Shawn fa*go says to insert the small hook tool (with the hook facing upward) as far as possible into the lock along one of the grooves on the side of the key. Then, “pull straight out and the key should come out.”

   • If the hook tool doesn’t work, try the spiral style tool. Instead of twisting the tool toward the key, spin the tool’s handle several times before pulling it straight out.
   • If the keyhole is in between the locked and unlocked positions, use needle nose pliers to reach inside the hole and turn it into either position.

Dismantling the Lock

Download Article

1. Unscrew the door handle or lock to open the door. If you need to open a door immediately and the other methods don’t work, unscrew the handle.^[15] Insert a screwdriver into the center hole in the latch assembly. Push towards the door latch, wiggling back and forth until the door pops open.^[16]

   • If your door handle doesn’t have any visible screws, you may have to twist the plate underneath it to expose the screws.^[17]
   • If the key is stuck in your car, motorcycle, or a padlock and won’t come out with the other methods, it might be best to call a professional to help instead.

Advertisem*nt

Community Q&A

Ask a Question

Tips

Thanks for submitting a tip for review!

1 votes - 100%